ICP-CC488 Installation Guide Contents
EN 5
15.27 | System Status Reporting Options | 69 |
15.28 | Test Reporting Time | 69 |
15.29 | Test Reporting Dialer Options | 70 |
16.0 | Programmable Outputs | 70 |
16.1Redirecting Outputs to the Codepad Buzzer
......................................................................... 71
16.2 | Output Event Types | 71 |
16.3 | Output Polarity | 76 |
16.4 | Output Timing | 77 |
16.5 | Pulsing Polarities | 77 |
16.6 | 77 | |
17.0 | System Event Timers | 77 |
17.1 | Programming Entry/Exit Timers | 78 |
17.2 | Entry Timer 1 | 78 |
17.3 | Entry Timer 2 | 78 |
17.4 | Exit Timer | 78 |
17.5 | Entry Guard Timer for STAY Mode | 78 |
17.6 | Delay Alarm Reporting Time | 78 |
17.7 | Sensor Watch Time | 78 |
17.8 | Codepad Lockout Time | 79 |
17.9 | Siren Run Time | 79 |
17.10 | Siren Sound Rate | 79 |
17.11 | Auto Arming | 79 |
17.12 | Auto Arming Time | 79 |
17.13 | Auto Disarming Time | 79 |
17.14 | 80 | |
17.15 | Speaker Beep Volume | 80 |
17.16 | System Time | 80 |
17.17 | System Date | 80 |
18.0 | System and Consumer Options | 80 |
18.1 | System Options 1 | 80 |
18.2 | System Options 2 | 81 |
18.3 | System Options 3 | 81 |
18.4 | System Options 4 | 82 |
18.5 | Consumer Options 1 | 82 |
18.6 | Consumer Options 2 | 83 |
18.7 | Consumer Options 3 | 83 |
18.8 | Radio Input Options | 83 |
19.0 | Partitioning | 84 |
19.1CP500 Master Partitioned LED Codepad. 84
19.2 Using Codepads in a Partitioned System .. 84
19.2.1Operating with a CP5 Area Addressable
LED Codepad | 84 |
19.2.2Operating with a CP5 Master Partitioned
| Codepad | 84 |
19.3 | Programming | 84 |
19.3.1 | Partitioning Options 1 | 85 |
19.3.2 | Partitioning Options 2 | 85 |
19.4 | Zone Allocations | 85 |
19.4.1 | Zone Allocations for Areas 1 and 2 | 86 |
19.5 | User Code Allocations | 86 |
19.6Setting Up and Programming Codepads for
Partitioning | 86 |
19.6.1Setting Up the Master Partitioned Codepad
as the Main Codepad | 87 |
19.6.2Setting Up an Area 1 Codepad as the Main
| Codepad | 87 |
19.6.3 | Setting Up an Area 1 Codepad | 87 |
19.6.4 | Setting Up an Area 2 Codepad | 87 |
19.7Codepad Connections For Partitioning -
| Examples | 87 |
20.0 | RF Information | 88 |
20.1 | RF Option Bit | 88 |
20.2 | RF Device Mapping Option | 89 |
20.3Default RF Device Mapping (Devices 1 to 8)
......................................................................... 89
20.4Default RF Device Mapping (Devices 9
to 16) | 89 |
20.5Using Hexadecimal Values for RF Device
Mapping | 89 |
20.6RF Device Signal Strength (Devices 1 to 8)
(Read Only) | 90 |
20.7RF Device Signal Strength (Devices 9 to 16)
| (Read Only) | 90 |
21.0 | Optional Equipment | 90 |
21.1RE012/RE013 2 Channel/4 Channel Hand
| Held Transmitters 304 MHz | 90 |
21.2 | RE005 2 Channel Radio Interface | 90 |
21.3 | SS914 EDMSAT Satellite Siren | 91 |
21.4 | CC891 Programming Key | 91 |
21.5 | CC816 Alarm Link Software | 91 |
21.6
21.7
21.8
Addressable Codepad | 91 |
21.9
......................................................................... 91
21.10 | CP105 Night Arm Station | 91 |
21.11 | TF008 Plug Pack (TF008) | 91 |
22.0 | Terminals and Descriptions | 92 |
22.1 | Terminal Descriptions | 92 |
22.2 | Glossary Of Terms | 93 |
22.3 | Diagrams | 95 |
23.0 | Appendices | 99 |
23.1Appendix A – Telephone
23.2Appendix B – Test Reports Only When
| Armed | 99 |
24.0 | Specifications | 100 |
24.1 | Warranty Statement | 100 |
24.2 | Specifications | 100 |
24.3 | Software Version Number | 100 |
