Cabletron Systems 2.2 manual Source Route Configuration, Source Route ConÞguration Window

Bridging

To select the transmission method for TCP/IP, IPX, SNA, NetBIOS or Other protocols:

1.Click on the option button next to the transmission method you would like your Token Ring bridge port to use: Transparent, Source Route, or Auto.

2.Click on Set to apply the desired mode.

Source Route Configuration

With the Source Route ConÞguration window, you can view address and routing information, and set source route bridging parameters for bridging interfaces.

To access the Source Route ConÞguration window from the Bridge Status window:

1.Click on the desired Port button () to display the port menu.

2.Click on Source Route Configuration. The Source Route Configuration window, Figure 2-16, will appear.

To access the Source Route ConÞguration window from the Chassis View window:

1.Click on the appropriate bridge port index to access the Port menu.

2.Click on Source Route Configuration. The Source Route Configuration window, Figure 2-16, will appear.

Figure 2-16. Source Route ConÞguration Window

Source Route Configuration 2-57