
Bridging
From this window you can manually set the operational mode of the port, determining the speed of the port (10 Mbps or 100 Mbps), and whether it uses full duplex or standard mode bridging.
You can also set a
To access the Fast Ethernet ConÞguration window from the Bridge Status
window:
1.Click on the desired Port button () to display the Port menu.
2.Click on Configuration. The Fast Ethernet Configuration Port X window (where X represents the port number of the selected interface), Figure
To access the Fast Ethernet ConÞguration window from the Chassis View window:
1.Click on the appropriate port index to access the Port menu.
2.Click on Configuration. The Fast Ethernet Configuration Port X window (where X represents the port number of the selected interface), Figure
Figure 2-24. Fast Ethernet ConÞguration Port X Window
From this window you can manually set the operational mode of the port, orÑfor 100Base-TX interfacesÑset the port to auto-negotiation so that the appropriate operational mode can be determined automatically. The mode you set will
Duplex Modes |