Setting the system date & time
Cisco TelePresence Content Server 4.1 printable online
Page 110 of 121
It is important th at the system date, tim e and time zone are correct. Th e y are set as part of th e
installation proced ure (see the Content Server Getting Start ed Guide), but can be upd ated if required,
as follows.
1. Open the Windows Server administrati on interface: go to Management settings > Windows
server.
2. Go to Maintenance > Date/Time.
3. Update the date, time an d time zone settings and then click OK.
4. Restart the Content Ser ver: go to Maintenance > Shutdown > Restart.