Cisco Systems D14595.03 manual Enter the SIP display name, SIP, Address URI, Server address

			Configuring site settings
Field		Field description	Usage tips
			reseller for more information.
SIP settings
Registration		Displays the status of Content Server’s	Click View all SIP registrations to
status		registration with the SIP registrar.	display a page showing all the system
			and Recording alias registration details.
			See Displaying SIP registrations.
SIP enabled		Select to enable registration with a SIP	Enter the SIP display name, SIP
		registrar. SIP is not available for a cluster.	address (URI), Server address and
			choose the Transport.
SIP display		The Content Server’s SIP display name.	This is presented as a description of the
name			SIP URI by the SIP registrar to other
			systems.
SIP address		Other systems can call the Content Server
(URI)		using the SIP Address or URI (Uniform
		Resource Identifier) if the Content Server
		is registered to a SIP registrar. The
		Recording alias specified in the Default
		Recording aliases below is used for the
		call.
Server		Always Manual.
discovery
Server		The IP address or DNS name of the SIP	When changing the address of the SIP
address		registrar.	registrar, you need to change the server
			address in all SIP URIs of Recording
			aliases; for example, from
			SIPalias@SIP.registrar.1 to
			SIPalias@SIP.registrar.2.
Server type		Always Auto, which supports registering to
		standard SIP registrars such as
		OpenSIPS.
Transport		The transport protocol for SIP. The default
		is TCP (Transmission Control Protocol).
		UDP (User Datagram Protocol) can also
		be used.
User name		The user name to authenticate to the SIP
		registrar.
Password/Pas		The password to authenticate to the SIP
sword confirm		registrar.
Authentication
Authentication		Choose the authentication method for the	There are three modes of authentication
		Content Server.	(for more information see
		If you select either Domain or LDAP	Understanding groups and users):
		authentication, expand the LDAP server	Local: Only users with valid local
		section and enter the details of a Microsoft	accounts added through the Groups &
		Active Directory server. To enter details for	users page can log in. Local groups are
		more than one LDAP server, click Add	not supported.
		LDAP server. Currently, only Microsoft	Domain: Users with domain accounts
		Active Directory Server is supported.	and local users are able to log in. The
		Clicking Save checks the LDAP server	local administrator account can be used
	Cisco TelePresence Content Server 4.1 printable online		Page 88 of 121