Cisco Systems D14595.03 manual Sizes, Bit rates, Media server, Configuration, Settings

Managing conference outputs

Field Field description Usage tips

•Real Media for playback using Real Media Player.

On demand	Select up to two conference sizes	Audio only: For use when users have very poor
sizes	based on your users' streaming	quality internet access. Audio will be recorded
	environment and internet	and played back, and, if the dual video stream
	connection	is activated during the call, it will be displayed
		as still images.
		Small: For use when users have modem
		access. The target bit rate for Small outputs for
		this conference is displayed in Bit rates below.
		In the Two videos layout, the dual video stream
		is displayed as still images.
		Medium: For use with broadband access to the
		internet. The target bit rate for Medium outputs
		for this conference is displayed in Bit rates
		below.
		Large. For access to a high-speed LAN. This
		format takes the longest to transcode. The
		target bit rate for Large outputs for this
		conference is displayed in Bit rates below.
Bit rates	Displays the target bit rate for the
(kbps)	Small, Medium and Large sizes.
	The number displayed depends on
	the target bit rates set in Site
	settings, and the call speed at
	which the conference was
	recorded.
On demand	Select the Media server	The Media servers configurations shown in the
Media server	configurations for on demand	drop-down lists by default are those selected in
configuration	viewing of the conferences	the System defaults section of Site settings.
settings	recorded using this template.
	Formats not selected above are
	grayed out.
Outputs to download for portable devices
Output layout	Select the layout to use.	If the conference was recorded without a dual
		video stream, this will be the single video layout
		where one movie file is created showing the
		main video stream.
		If the conference was recorded with a dual
		video stream, then this is one of:
		Switching: creates one movie file. The main
		video stream is replaced by the dual video
		stream when the dual video stream is activated.
		The main video stream is displayed again when
		the dual video stream stops.
		Picture in picture: creates one movie file with
		the main video stream inserted into the dual
		video stream. When the dual video stream is
		activated, the main video stream transitions to
		the selected location, displaying the dual video
		stream as the larger picture. On turning off the
		dual video stream, the main video stream
		transitions to take up the entire picture again.
		This layout can be restrictive when viewing on a

Cisco TelePresence Content Server 4.1 printable online Page 29 of 121