Cisco Systems OL-7396-01 Username Commands

4-8
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter4 Configuring System ManagementFunctions
System Management Tasks
Username Commands
To establish a username-based authentication system at login, use the following global configuration
commands:
Command Purpose
show snmp Checks the status of communications between
the SNMP agent and SNMP manager.
Command Purpose
username name [dnis] [nopassword |
password [encryption-type] password]
Configures username-based authentication
system at login.
username name password secret Configures username-based CHAP
authentication system at login.
username name autocommand command Configures username-based authentication
system at login with an additional command
to be added.
username name nohangup Configures username-based authentication
system at login and prevents Cisco IOS from
disconnecting after the automatic command is
completed.
username name noescape Configures username-based authentication
system at login but prevents the user from
issuing an escape character on the swit ch.
username name privilege level Sets user privilege level.