9-28
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter9 Configuring Resource Management
Configuring Physical and Logical Interface Parameters
Example
The following example shows how to configure the connection best-effort limit configura tion to 2000:
Switch(config)# interface atm 3/0/0
Switch(config-if)# atm cac best-effort-limit 2000
Displaying the Interface Best-Effort Limit Configuration
To display the interface best-effort configuration, use the following EXEC command:
Example
The following example shows the interface best-effort configuration with the switch processor feature
card installed:
Switch> show atm interface resource atm 3/0/0
Resource Management configuration:
Service Classes:
Service Category map: c1 cbr, c2 vbr-rt, c3 vbr-nrt, c4 abr, c5 ubr
Scheduling: RS c1 WRR c2, WRR c3, WRR c4, WRR c5
WRR Weight: 8 c2, 1 c3, 1 c4, 1 c5
Pacing: disabled 0 Kbps rate configured, 0 Kbps rate installed
Service Categories supported: cbr,vbr-rt,vbr-nrt,abr,ubr
Link Distance: 0 kilometers
Controlled Link sharing:
Max aggregate guaranteed services: none RX, none TX
Max bandwidth: none cbr RX, none cbr TX, none vbr RX, none vbr TX,
none abr RX, none abr TX, none ubr RX, none ubr TX
Min bandwidth: none cbr RX, none cbr TX, none vbr RX, none vbr TX,
none abr RX, none abr TX, none ubr RX, none ubr TX
Best effort connection limit: enabled 2000 max connections
Max traffic parameters by service (rate in Kbps, tolerance in cell-times):
Peak-cell-rate RX: none cbr, none vbr, none abr, none ubr
Peak-cell-rate TX: none cbr, none vbr, none abr, none ubr
Sustained-cell-rate: none vbr RX, none vbr TX
Minimum-cell-rate RX: none abr, none ubr
Minimum-cell-rate TX: none abr, none ubr
CDVT RX: none cbr, none vbr, none abr, none ubr
CDVT TX: none cbr, none vbr, none abr, none ubr
MBS: none vbr RX, none vbr TX
<information deleted>
Command Purpose
show atm interface resource atm
card/subcard/port[.vpt#]
Displays the subinterface best-effort
configuration.