6-8
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter6 Configuring ATM Network Interfaces
Configuring IISP Interfaces
Displaying the IISP Configuration
To show the interface IISP configuration, use the following EXEC command:
Example
The following example shows the configuration of ATM interface3/0/0 on the ATM switch router
(SB-1):
Switch(SB-1)# show atm interface atm 3/0/0
Interface: ATM3/0/0 Port-type: oc3suni
IF Status: UP Admin Status: up
Auto-config: disabled AutoCfgState: not applicable
IF-Side: User IF-type: IISP
Uni-type: not applicable Uni-version: V3.0
Max-VPI-bits: 8 Max-VCI-bits: 14
Max-VP: 255 Max-VC: 16383
ConfMaxSvpcVpi: 255 CurrMaxSvpcVpi: 255
ConfMaxSvccVpi: 255 CurrMaxSvccVpi: 255
ConfMinSvccVci: 35 CurrMinSvccVci: 35
Svc Upc Intent: pass Signalling: Enabled
ATM Address for Soft VC: 47.0091.8100.0000.00e0.4fac.b401.4000.0c80.8000.00
Configured virtual links:
PVCLs SoftVCLs SVCLs TVCLs PVPLs SoftVPLs SVPLs Total-Cfgd Inst-Conns
3 0 0 0 0 0 0 3 2
Logical ports(VP-tunnels): 0
Input cells: 264089 Output cells: 273253
5 minute input rate: 0 bits/sec, 0 cells/sec
5 minute output rate: 0 bits/sec, 0 cells/sec
Input AAL5 pkts: 172421, Output AAL5 pkts: 176993, AAL5 crc errors: 0
Command Purpose
show atm interface atm card/subcard/port[.vpt#] Shows the interface configuration.