Cisco Systems OL-7396-01 Displaying Routes, Displaying Environment, Checking Basic Connectivity (Catalyst 8540 MSR), Checking Basic Connectivity (Catalyst 8510 MSR and LightStream 1010)

4-24
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter4 Configuring System ManagementFunctions
Testing the System Management Functions
Displaying Routes
To discover the IP routes that the ATM switch router packets will actually take when traveling to their
destination, use the following EXEC command:
Displaying Environment
To display temperature and voltage information on the ATM switch router console, use the following
EXEC command:
Checking Basic Connectivity (Catalyst 8540 MSR)
To diagnose basic ATM network connectivity on the Catalyst 8540 MSR, use the following privileged
EXEC command:
Checking Basic Connectivity (Catalyst 8510 MSR and LightStream 1010)
To diagnose basic ATM network connectivity on the Catalyst 8510 MSR and LightStream 1010 ATM
switch routers, use the following privileged EXEC command:
Command Purpose
traceroute [protocol] [destination] Displays packets through the network.
Command Purpose
show environment Displays temperature and voltage
information.
Command Purpose
ping atm interface atm card/subcard/port
vpi [vci] {end-loopback [destination] |
ip-address ip-address | seg-loopback
[destination]}
Uses ping to check the ATM network
connection.
Command Purpose
ping atm interface atm card/subcard/port
vpi [vci] {atm-prefix prefix | end-loopback
[destination] | ip-address ip-address |
seg-loopback [destination]}
Uses ping to check the ATM network
connection.