Cisco Systems OL-7396-01 Redundancy Configuration Mode (Catalyst 8540 MSR), Main CPU Configuration Mode (Catalyst 8540 MSR)

2-16
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter2 Understanding the User Interface
Accessing Each Command Mode
Redundancy Configuration Mode (Catalyst 8540 MSR)
Redundancy configuration mode provides access to commands used to configure system re dundancy and
EHSA operation.
To enter redundancy configuration mode from global configuration mode, use the redundancy
command; the prompt changes to the ATM switch router’s hostname followed by (config-r):
Switch(config)# redundancy
Switch(config-r)#
To exit ATM redundancy configuration mode and return to global configuration mode, use the exit
command:
Switch(config-r)# exit
Switch(config)#
To exit ATM redundancy configuration mode and return to privileged EXEC mode, use the end
command or press Ctrl-Z:
Switch(config-r)# end
Switch#
For detailed information on configuring system redundancy, see the Testing the Configuration section in
Chapter 3, “Initially Configuring the ATMSwitch Router.”
Main CPU Configuration Mode (Catalyst 8540 MSR)
Main CPU configuration mode provides access to commands used to synchronize the configuration of
the primary and secondary route processors.
To enter main CPU configuration mode from redundancy configuration mode, use the main-cpu
command; the prompt changes to the ATM switch router’s hostname followed by (config-r-mc):
Switch(config-r)# main-cpu
Switch(config-r-mc)#
To exit ATM main CPU configuration mode and return to redundancy configuration mode, use the exit
command:
Switch(config-r-mc)# exit
Switch(config-r)#
To exit ATM main cpu configuration mode and return to privileged EXEC mode, use the end command
or press Ctrl-Z:
Switch(config-r-mc)# end
Switch#
For detailed information on synchronizing configurations, see the Testing the Configuration section in
Chapter 3, “Initially Configuring the ATMSwitch Router.”