Cisco Systems OL-7396-01 Controlling ATM Accounting Data Collection

15-9
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter15 Configuring ATM Accounting, RMON, and SNMP
Configuring ATM Accounting
Controlling ATM Accounting Data Collection
To configure the behavior of the buffers used for ATM accounting collection, use the following command
in privileged EXEC mode:
Examples
The following example specifies that all VCs that meet the minimum age requirement should be
collected:
Switch# atm accounting collection collect-now accntg_file1
The following example swaps the buffers used to store accounting records; the old buffer is now ready
to download:
Switch# atm accounting collection swap acctng_file1
Displaying the ATM Accounting Data Collection Configuration and Status
To display the ATM accounting file configuration status, use the following EXEC command:
Example
The following example shows the ATM accounting status using the show atm accounting files EXEC
command:
Switch# show atm accounting
ATM Accounting Info: AdminStatus - UP; OperStatus : DOWN
Trap Threshold - 90 percent (4500000 bytes)
Interfaces:
File Entry 1: Name acctng_file1
Descr: atm accounting data
Min-age (seconds): 3600
Failed_attempt : C0
No file buffers initialized
selection Entry -
Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1
Selection entry 1, list - FF.FE.BF.FC
Selection entry 1, connType - F0.00
Active selection -
Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1
Selection entry 1, list - FF.FE.BF.FC
Selection entry 1, connType - F0.00
<Information deleted>
Command Purpose
atm accounting collection {collect-now |
swap} filename
Configures the ATM accounting data
collection.
Command Purpose
show atm accounting Displays the ATM accounting status.