11-19
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter11 Configuring ATM Routing and PNNI
Basic PNNI Configuration
Example
Configure the name of the node as eng_1 using the name command, as in the following example:
Switch(config)# atm router pnni
Switch(config-atm-router)# node 1
Switch(config-pnni-node)# name eng_1

Displaying the Node Name Configuration

To display the ATM PNNI node name configuration, use the following privileged EXEC command:
Example
This example shows how to display the ATM node name configuration using the show atm pnni
local-node command from user EXEC mode:
Switch# show atm pnni local-node
PNNI node 1 is enabled and running
Node name: eng_1
System address 47.0091810000000002EB1FFE00.0002EB1FFE00.01
Node ID 56:160:47.0091810000000002EB1FFE00.0002EB1FFE00.00
Peer group ID 56:16.0347.0000.0000.0000.0000.0000
Level 56, Priority 0 0, No. of interfaces 1, No. of neighbors 0
Parent Node Index: 2
Node Allows Transit Calls
Node Representation: simple
Hello interval 15 sec, inactivity factor 5,
Hello hold-down 10 tenths of sec
Ack-delay 10 tenths of sec, retransmit interval 5 sec,
Resource poll interval 5 sec
SVCC integrity times: calling 35 sec, called 50 sec,
Horizontal Link inactivity time 120 sec,
PTSE refresh interval 1800 sec, lifetime factor 200 percent,
Min PTSE interval 10 tenths of sec
Auto summarization: on, Supported PNNI versions: newest 1, oldest 1
Default administrative weight mode: uniform
Max admin weight percentage: -1
Next resource poll in 3 seconds
Max PTSEs requested per PTSE request packet: 32
Redistributing static routes: Yes
Configuring a Parent Node
For a node to be eligible to become a PGL within its own peer group, you must configure a parent node
and a nonzero election leadership level (described in the following section, “Configuring the Node
Election Leadership Priority”). If the node is elected a PGL, the node specified by the parent command
becomes the parent node and represents the peer gro up at the next hierarchical level.
Command Purpose
show atm pnni local-node Displays the ATM PNNI router configuration.