Citrix Systems 5.6 manual Event commands, Event classes, Event-wait

Parameter Name	Description	Type
uuid	The unique identifier/object reference for	read only
	the console
vm-uuid	The unique identifier/object reference of	read only
	the VM this console is open on
vm-name-label	The name of the VM this console is open	read only
	on
protocol	Protocol this console uses. Possible	read only
	values are vt100: VT100 terminal, rfb:
	Remote FrameBuffer protocol (as used in
	VNC), or rdp: Remote Desktop Protocol
location	URI for the console service	read only
other-config	A list of key/value pairs that specify	read/write map parameter
	additional configuration parameters for
	the console.

Event commands

Commands for working with events.

Event classes

Event classes are listed in the following table:

Class name	Description
pool	A pool of physical hosts
vm	A Virtual Machine
host	A physical host
network	A virtual network
vif	A virtual network interface
pif	A physical network interface (separate VLANs are represented as several PIFs)
sr	A storage repository
vdi	A virtual disk image
vbd	A virtual block device
pbd	The physical block devices through which hosts access SRs

event-wait

event-waitclass=<class_name> [<param-name>=<param_value>][<param-name>=/=<param_value>]

150