Citrix Systems 5.6 manual Vm-cd-add, Vm-cd-ejectvm-selector=vmselectorvalue

Parameter Name	Description	Type
snapshot_time	the timestamp of the	read only
	snapshot operation that
	created this VM snapshot
memory-target	the target amount of memory	read only
	set for this VM
blocked-operations	lists the operations that	read/write map parameter
	cannot be performed on this
	VM
last-boot-record	record of the last boot	read only
	parameters for this template,
	in XML format
ha-always-run	True if this VM will always	read/write
	restarted on another host in
	case of the failure of the host
	it is resident on
ha-restart-priority	1, 2, 3 or best effort. 1 is the	read/write
	highest restart priority
blobs	binary data store	read only
live	True if the VM is running,	read only
	false if HA suspects that the
	VM may not be running.

vm-cd-add

vm-cd-addcd-name=<name_of_new_cd>device=<integer_value_of_an_available_vbd> [<vm-selector>=<vm_selector_value>...]

Add a new virtual CD to the selected VM. The device parameter should be selected from the value of the allowed-VBD-devicesparameter of the VM.

The VM or VMs on which this operation should be performed are selected using the standard selection mechanism (see VM selectors). Optional arguments can be any number of the VM parameters listed at the beginning of this section.

vm-cd-eject

vm-cd-eject[<vm-selector>=<vm_selector_value>...]

Eject a CD from the virtual CD drive. This command only works if there is one and only one CD attached to the VM. When there are two or more CDs, use the command xe vbd-ejectand specify the UUID of the VBD.

The VM or VMs on which this operation should be performed are selected using the standard selection mechanism (see VM selectors). Optional arguments can be any number of the VM parameters listed at the beginning of this section.

202