Compaq EV67, 21264 Serial Instruction Cache Load Operation, 11-6Testability and Diagnostics

Power-Up Self-Test and Initialization

In the SROM represented in Figure 11–4,the length for fields Cbox Config Data(0,n) plus MBZ(m,0) must equal 367 bits. (If Cbox Config Data(0,n) is (0,366), MBZ would be zero.)

For the 21264/EV67, Cbox Config Data is 304 bits; the value for n is 303.

Therefore, the value MBZ field for Pass 3 is:

MBZ(m,0) = 367 minus 304 = 63 = (62,0)

Tables 11–3and 5–24describe the details of the Icache and Cbox bit fields, respec- tively. Note that fetch_count(1,0) must be 3, which guarantees that the SROM never partially loads an Icache block.

Figure 11–4 SROM Content Map

fetch [0](0,192)	fetch[j-1](0,192)	fetch[j](0,192)	fetch_count(11,0)	Cbox Config Data(0, n)	MBZ(m,0)
(first block)		(last block)

11.5.2.1 Serial Instruction Cache Load Operation

All Icache bits, including each block’s tag, address space number (ASN), address space match (ASM), and valid and branch history bits are loaded serially from offchip serial ROMs. Once the serial load has been invoked by the chip reset sequence, the cache is loaded from the lower to the higher addresses.

The serial Icache fill invoked by the chip reset sequence operates internally at a fre-

GCLK

quency of --------------- .

256

Table 11–3lists the Icache bit fields in an SROM line. Fetch bits are listed in the order of shift direction (to down and to right). In Table 11–3:

Bit Type	Meaning
c	Disp_add carry
i	Instruction
iq	Iqueue predecodes
tr	Trouble bits
dv	Destination valid
ea	Ea_src
par-MBZ	Must be zero

The load occurs at the rate of 1 bit per 256 CPU cycles. The chip outputs a 50% duty cycle clock on the SromClk_H pin.

The serial ROMs can contain enough Alpha code to complete the configuration of the external interface (for example, set the timing on the external cache RAMs, and diag- nose the path between the CPU chip and the real ROM).

11–6Testability and Diagnostics Alpha 21264/EV67 Hardware Reference Manual