128 Removing and Installing Parts
www.dell.com | support.dell.com
NOTICE: If you use a blunt, nonconductive object to pry the batt ery out of its
socket, be careful not to touch the system board with the object. Be sure that
the object is inserted between the battery and the socket before you attempt to
pry out the battery. Otherwise, you may damage the system board.
Pry the battery out of its socket with your fingers or with a blunt,
nonconductive object, such as a plastic screwdriver.
6Install the new battery.
Orient the battery with the side labeled "+" facing up (see the
following figure). Then insert the battery into the socket, and snap it
into place.
Installing the Computer Battery
7Close the computer cover.
8Stand the computer upright.
9Reconnect the computer and devices to their electrical outlets, and
turn them on.
battery
battery socket