w w w . d e l l . c o m s u p p o r t . d e l l . c o m
aLift the retention bracket up to disengage it from the chassis.
bLift the bracket away from the chassis.
NOTICE: To avoid damage to the memory riser board, press the securing clips with equal force applied at each end of the memory socket.
3Remove memory riser board A:
NOTE: To access the securing clips on the system board memory sockets, it may be necessary to remove the fan for microprocessor 0. For instructions on removing and installing the processor fan, see the Service Manual.
aPress the securing clips of system board memory socket 1 outward simultaneously until riser board A pops out slightly from the socket.
bLift riser board A away from the retention brackets on riser board B.
4Remove memory riser board B:
a Press the securing clips of system board memory socket B outward simultaneously until riser board B pops out slightly from the socket.
b Lift riser board B away from socket 2.
80
