Dell 530 manual S t e m B e e p codes, Code Cause Action, Solving Problems 191

S y s t e m B e e p C o d e s

Code	Cause	Action
1-1-2	Microprocessor register failure	Contact Dell for technical assistance.
1-1-3	NVRAM read/write failure	Run the System Board Devices tests in the Dell
		Diagnostics.
1-1-4	ROM BIOS checksum failure	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.
1-2-1	Programmable interval timer	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.
1-2-2	DMA initialization failure	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.
1-2-3	DMA page register read/write failure	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.
1-3	Video memory failure	Run the VESA/VGA Interface tests in the Dell
		Diagnostics.

1-3-1 Memory modules not being properly identified or used See "System Memory Problems." through

2-4-4

3-1-1	Slave DMA register failure	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.
3-1-2	Master DMA register failure	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.
3-1-3	Master interrupt mask register failure	Contact Dell for technical assistance.
3-1-4	Slave interrupt mask register failure	Contact Dell for technical assistance.
3-2-2	Interrupt vector loading failure	Contact Dell for technical assistance.
3-2-4	Keyboard controller failure	Run the Keyboard tests in the Dell Diagnostics.
		Otherwise, contact Dell for technical assistance.
3-3-1	NVRAM power loss	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.
3-3-2	NVRAM configuration	Run the System Board Devices tests in the Dell
		Diagnostics, if possible.

3-3-3 Real-time clock (RTC) or keyboard controller not found

Run the Keyboard and System Board Devices tests in the Dell Diagnostics. Otherwise, contact Dell for technical assistance.

Solving Problems

191