Solving Problems 187
Gate A20 failure One or more memory modules may
be loose. See "System Memory Problems."
General failure The operating system is unable to
carry out the command. This message is usually followed by
specific information—for example,
PRINTER OUT OF PAPER. Respond by
taking the appropriate action.
Hard disk configuration
error The hard drive failed initialization. See "Hard Drive Problems."
Hard disk controller
failure
Hard disk failure
Hard drive read failure
The hard drive failed initialization. See "Hard Drive Problems."
Invalid configuration
information - please run
SETUP program
The system configuration
information does not match the
hardware configurat i on.
Enter system setup and correct the system
configuration information.
Keyboard controller
failure
Keyboard failure
Keyboard stuck key failure
A cable or connector may be loose, or
the keyboard or keyboard/mouse
controller may be faulty.
See "Keyboard Problems."
Memory address line
failure at address, read
value expecting value
One or more memory modules may
be faulty or improperly seated. See "System Memory Problems."
Memory allocation error The software you are attempting to
run is conflicting with the operating
system or another application
program or utility.
Turn off the computer, wait 30 seconds,
and turn it on. Try to run the program
again. If the problem persists, contact the
software company.
System Messages
(continued)
Message Cause Action