Jumper Settings

The following figure shows the location of the jumpers on the system board.

S y s t e m B o a r d J u m p e r s

PSWD

RTCRST

NOTICE: Before changing a jumper setting, verify that the standby power light on the system board has turned off. Otherwise, damage to your computer or unpredictable results may occur. To locate this light, see "System Board Components" or the interior service label.

To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.

The following table lists the system board jumpers and their settings.

S y s t e m - B o a r d J u m p e r S e t t i n g s

Jumper

Setting

Description

PSWD

(default)

Password features are enabled.

 

 

Password features are disabled.

RTCRST

Real-time clock reset. Can be used for troubleshooting. See "Reset Corrupted BIOS Settings."

jumpered

unjumpered

Advanced Features

55

Page 55
Image 55
Dell 530 manual Jumper Settings, S t e m B o a r d J u m p e r s, S t e m B o a r d J u m p e r S e t t i n g s