Dell 530 - page 183

Solving Problems 183

System Messages

Message Cause Action

Address mark not found The BIOS found a faulty disk sector

or could not find a particular disk

sector.

See "Hard Drive Problems."

Alert! Card-cage fan not

detected. The expansion-card cooling fan is not

installed, has failed, or is not properly

connected to the system board.

Ensure that an operational expansion-card

cooling fan is installed and connected to

the system board.

To locate the expansion-card cooling fan,

see "Inside the Computer."

Alert! Chipset heat sink

not detected. The chip set heat sink is not properly

installed on the system board. Ensure that chip set heat sink is properly

installed on the system board.

To locate the system-board chip set heat

sink, see "System Board Components."

Alert! Cover was

previously removed. The computer cover was opened. Enter system setup and reset the Chassis

Intrusion option.

Alert! CPU 0 failed Build-

In Self Test (BIST). The microprocessor 0 is faulty or

improperly seated. See "Microprocessor Problems."

Alert! CPU 1 failed Build-

In Self Test (BIST). The microprocessor 1 is faulty or

improperly seated. See "Microprocessor Problems."

Alert! CPU 0 fan not

detected. The microprocessor 0 cooling fan is

not installed, has failed, or is not

properly connected to the system

board.

Ensure that an operational cooling fan for

microprocessor 0 is installed and

connected to the system board. Also,

ensure that the microprocessor airflow

shroud is properly installed.

See "Microprocessor Airflow Shroud."

Alert! CPU 1 fan not

detected. The microprocessor 1 cooling fan is