110 Removing and Installing Parts
www.dell.com | support.dell.com
Raising the Expansion Card Retention Arm
5If you are installing a new expansion card, remove the filler bracket for
an empty card-slot opening. Then continue with step 7.
6If you are replacing an expansion card that is already installed in the
computer, remove the expansion card.
If necessary, disconnect any cables connected to the card. Grasp the
card by its top corners, and ease it o ut of its connector.
7Prepare the new expansion card for installation.
See the documentation that came with the expansion card for
information on configuring the card, making internal connections, or
otherwise customizing it for your computer.
expansion
card
card connector
card bracket
card retention arm