Extron electronic JMP 9600 Ventilation Guidelines, Tabletop Use, Rack Mounting, UL guidelines

Mounting and

Maintenance

This section details the following JMP 9600 Media Player procedures:

•Mounting the Media Player

•Cleaning the Air Filters

•Changing Fuses

•Battery Precautions

Mounting the Media Player

The JMP 9600 Media Player is housed in a rack-mountable, 2U high metal enclosure. It can be set on a tabletop or installed in a standard 19-inch wide rack.

Ventilation Guidelines

NOTE: When installing multiple JMP 9600 units in an equipment rack or other

enclosed area, it is highly recommended that the space be equipped with an active cool air intake and warm air exhaust system.

To allow sufficient ventilation and cooling, consider the following:

•Maintain a clear space at all times at the sides (2 inches [51 mm]) and rear (6 inches [152 mm]) of the player. This clear space must also allow vertical air movement. You can run cables in this space but dress the cables clear of any ventilation holes.

•Keep the front of the player clear of obstructions at all times.

•Do not impede the air flow into and out of the unit by covering the ventilation holes.

These requirements are usually met by any typical 19-inch rack mount environment.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient location.

Rack Mounting

UL guidelines

The following Underwriters Laboratories (UL) guidelines pertain to the installation of the media player into a rack.

1.Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consider installing the equipment in an environment compatible with the maximum ambient temperature specified by Extron (Tma = 104 °F

[+40 °C]).

JMP 9600 Media Player • Mounting and Maintenance 100