Transport Buttons
DPlay/Pause (
) button — Press this button to start the currently selected CPL or clip file or pause a currently playing presentation while leaving the image displayed.
EStop (
) button — Press this button to stop the currently playing presentation. When you press Play again, the presentation starts over from the beginning.
FPrevious clip (
) button — Press this button to load the previous CPL or clip file in the playlist. The button has no function if no playlist is loaded (using the menu controls).
GFrame mode button (
) — Press this button and then rotate the encoder knob
(item M) to step
HShuttle mode (
) button — Press this button and then rotate the encoder knob (item M) to “shuttle” backwards and forwards through the CPL or clip file, at a rate controlled by the encoder knob.
NOTE: The audio portion of the clip is active only when the playback speed is +1.0 
(normal forward speed).
INext clip (
) button — Press this button to load the next CPL or clip file in the playlist. The button has no function if no playlist is loaded (using the menu controls).
LCD and Menu Controls
JLCD screen and confidence monitor — The LCD display the user interface for local control. The screen can also display a presentation as the player outputs it on its video output connectors. The
KPreviouspage. button — Press this button to return to the previously displayed menu or
LEnter button — Press this button to initiate or activate a selected function.
Encoder knob
MEncoder knob — Rotate this knob to navigate the menu system. Rotate this knob when frame mode and shuttle mode are selected to operate those features.
JMP 9600 Media Player • Operation | 15 |
