Figure 69 shows using the Edit Playlist Properties dialog box to set the master player to generate an LTC (A) that starts counting up from 01:00:00:00 (exactly 1 hour) (B) once the play or TCStart command is received.

1

2

Figure 69. Generate an LTC

Figure 70 shows using the Edit Playlist Properties dialog box to generate an LTC that starts at 01:00:00:00 (C) once the play command is received, but to delay the start of the video play until 01:00:10:00 (by 10 seconds) (D). This creates a 10 second pre-roll period.

3

4

Figure 70. Delay Video Start

Figure 71 shows using the Edit Playlist Properties dialog box to generate an LTC starting at 01:00:00:00 (E) once the play command is received, start the video 10 seconds later (10-second delay) (F), and run the LTC on until 01:05:00:00 (G). If the video presentation is 4 minutes and 30 seconds, this results in a 30-second post-roll period.

5

6

7

Figure 71. Set an LTC Stop

JMP 9600 Media Player • Detailed System Interaction

90

Page 96
Image 96
Extron electronic JMP 9600 manual Generate an LTC