Extron electronic JMP 9600 manual Loop selection, Mute selection, Settings menu

Loop selection

In Loop mode, the player runs the selected playlist or clip file in a continuous loop, automatically starting the presentation over again once it ends. To toggle Loop mode on and off, rotate the encoder knob to highlight (box) the Loop selection and press the Enter button.

Mute selection

To toggle audio mute on and off, rotate the encoder knob to highlight (box) the Mute selection and press the Enter button. Mute disables the audio output from all 16 audio channels when the media player is in 1-channel mode. Mute disables audio channels 1 through 8 for video channel 1 and audio channels 9 through 16 for video channel 2 when the media player is in 2-channel or 2-channel locked mode.

NOTE: Audio is unmuted (is output) when power is cycled.

Settings menu

The Settings menu (see figure 14) provides submenus to control the behavior of the player and how it interacts with the connected audio/video systems and the network. Rotate the encoder knob to highlight the desired submenu and press the Enter button.

Figure 14. Settings Menu

NOTE: Figure 14 is not an accurate image of the Settings menu. The figure is

elongated to show all selections in the menu. On the media player, the Video selection is not visible until you rotate the Encoder knob to scroll down the

menu.

To return to the Settings menu from any of its submenus, press the Previous button.

JMP 9600 Media Player • Operation 20