Loading a Clip or Playlist into a Player Channel
NOTES: • You must have created one or more playlists before any are available for
selection to select (see “Playlist Editor Page“).
• Ensure that the media player is configured for
attempting to load 4:4:4 chroma subsamped or stereoscopic content. If the
player is configured for
mode, these formats will not load. Use the Setup > Video > Mode dialog
box submenu to check the video mode and change it if necessary.
• In
the same number of frames, resolution, bit depth, and number of audio
channel and must use 4:2:2 chroma subsampling. If these conditions are not
met, the files will not load.
• The player must be correctly configured for the clip or playlist that you select
using the Settings > Video submenu, or else the player does not load the
selected clip or playlist and the LCD reports ERROR.
• If you cannot get a clip to load, see “Setting the clip or playlist to
autoplay and view clip info“ to view the properties of the clip, which can
help reveal the problem).
• If you load a new clip with a different resolution and frame rate than the currently loaded clip, it can take up to 4 seconds before it is ready to play.
1.If necessary, click the Clips panel header (see Ä in figure 38) or Playlists panel footer (Å) in the Media Browser panel to open either the clip browser or playlist browser.
| 1a |
2b | 2a |
1b
Figure 38. Loading a Clip or Playlist
2.Scroll through the list of available content to the desired clip or playlist.
3.Drag (Ç) the desired clip or playlist from the Media Browser panel and drop it (É) into the desired channel window in the Channel Control panel. A green check appears while dragging the clip or playlist when it is of a format that can be loaded.
4.Click the Play control (
) to start the show.
JMP 9600 Media Player • HTML Operation | 41 |
