Extron electronic manual JMP 9600 Media Player Introduction

Linear Time Code feature — Supports strict system timing control.

ESGEN and MSGEN Genlock capability — JMP 9600 2K units are capable of multi-unit synchronous operation.

NOTE: ESGEN and MSGEN Genlock are proprietary sync signals that are native

to Electrosonic® products that have been acquired by Extron and to older Electrosonic products.

Multi-screen capable — Multiple JMP 9600 2K units can be locked together for multi- screen applications

General purpose input/output show control — Four optically-isolated inputs and 4 changeover relay contact outputs provide enhanced show control.

Permanent, rechargeable battery — The media player has a rechargeable lithium battery to track time of day when power is disconnected.

CAUTION: Non-Extron personnel must not attempt to remove the battery. Doing so will void the warranty.

WARNING: Service note to Extron personnel — There is a danger of explosion if the

battery is incorrectly replaced. Replace it only with the same or equivalent

type recommended by the manufacturer. Dispose of used batteries according to the instructions of the manufacturer.

Rack mountability

Front panel security lockout modes (Executive mode) — If a player is installed in an open area, where operation by unauthorized personnel may be a problem, a security lockout mode can be implemented via remote control (RS-232 or Ethernet). When the front panel is locked, no front panel controls are functional and another remote control operation is required to unlock the front panel controller and make the front panel fully operational.

JMP 9600 Media Player • Introduction 5