Cleaning the Air Filters

The JMP 9600 is equipped with two foam air filters that should be checked every four to six months and cleaned or replaced as required. You may need to perform this check more frequently in environments containing higher levels of particulates (such as dust).

CAUTION: Do not subject the player to excessively dusty environments.

Clean the air filters as follows:

WARNING: Physically disconnect both power cables from the player before removing the front panel.

1.Unplug both power cords.

2.Remove the eight front panel screws to access the foam filters.

3.Gently lift each filter from the receptacle.

4.Use compressed air or a vacuum cleaner to remove any accumulated dust.

NOTES: If dust remains, you can pass the filters under warm running water or

gently immerse them in warm soapy water. Ensure the filters are rinsed

and completely dry before reinstalling.

If the air filters are damaged, contact Extron for replacement

(part number 100-639-01LF).

5.Re-insert the filters into the receptacles on the unit.

6.Replace the front panel and secure it with the screws that were removed in step 2.

7.Restore power.

JMP 9600 Media Player • Mounting and Maintenance

102

Page 108
Image 108
Extron electronic JMP 9600 manual Cleaning the Air Filters