Setup Functions
A wide variety of communications, video, and audio setup functions, necessary to ensure peak performance of the player and the video/audio playback, are available using the Setup palette of tools (see figure 47). To select the setup functions, from the Playlist Editor page, click the Setup Editor link at the top right of the page.
Figure 47. Setup Palette
Audio Setup Dialog Box
The Audio setup dialog box (see figure 48) provides controls to set the volume and audio delay variables for the one or two output groups and to mute one or both outputs.
Media player set to
Media player set to
Figure 48. Audio Setup Dialog Box
NOTES: • The image shown on the left in figure 48 shows the audio setup dialog 
box when the media player is set to either
output. The dialog box on the right is
Setup > Video > Mode dialog box submenu to select the mode.
• Audio is unmuted (is output) when power is cycled.
To adjust the volume and delay values, click the up or down buttons (
) as necessary. The green bar in the field indicates that your selection is being saved.
To toggle audio mute on and off, click the appropriate Mute check box. Mute disables the audio output from all 16 audio channels when the media player is in
Click the 
to close the dialog box.
JMP 9600 Media Player • HTML Operation | 47 |
