Mode Selection
NOTES: • See page 3 for detailed descriptions of the functions of the modes.
•The loop selections are indepen- dent of each other; you can select one, both, or neither.
•Ch. 2 loop enabled is only available for selection when the switcher is in either
•In
Timecode Selection
NOTES: • Chase — Stay in sync with a received timecode signal.
•Trigger — Respond to a specific Timecode and continue with no further response to the ongoing timecode signal.
HDSDI Selection
NOTES: • The High Framerate, available on the JMP 9600 2K model only, supports resolutions of up to 1920x1080 and 2048x1080 at 48, 50, and 60 Hz.
The player must be set to
•When in
all outputs are active (Channels 1 and 2). When in
•The player ships with the
Timecode Selection
GenLock Selection
NOTES: • Master — Send both ESGEN and MSGEN genlock as a master.
•ES Genlock — Receive ESGEN genlock as a slave.
•MS9200 Genlock — Receive MSGen genlock as a slave.
•Only JMP 9600 2K units support ES genlock or MS genlock.
•Black Burst PAL, Black Burst NTSC, and Trilevel — Receive a selected sync signal.
•Source indication — Indicates the presence of an external genlock signal.
•Lock indication
•The media player monitors the sync inputs. If any selected sync signal is lost, the media player automatically defaults to Master.
•Media players with serial numbers
Figure 29. Mode Selection
JMP 9600 Media Player • Operation | 32 |