Extron electronic JMP 9600 Features, Digital video outputs HD-SDI or DVI-I, channel output modes

Features

Digital video outputs: HD-SDI or DVI-I —

•Two DVI-I outputs — One connector per output channel supports 8-bit 4:2:2 sampled RGB or YCrCb.

•Two HD-SDI outputs — Can be configured as one dual link HD-SDI output or two single link HD-SDI outputs (one per channel — two single link outputs are available in 1-channel output mode only).

NOTE: With HD-SDI 4:4:4 sampling, both video outputs (HDSDI-1 and HDSDI-2) are connected to the display.

•The dual outputs of either format can operate as two independent sources or as two synchronized outputs.8

Supports multiple video resolutions —

				Frames per second (Fps)
	23.98		25		29.97	30	48	50	59.94	60
Resolution		24
		JMP 9600 HD and JMP 9600 2K

1280 x 780

1920 x 1080i

• • • •*

• •

JMP 9600 2K only

1920 x 1080i

1920 x 1080p

2048 x 1080p

•

•	•	•	•	•	•	•	•	•
•	•	•	•	•	•	•	•	•

*4:2:2 only on HD model

1- and 2-channel output modes —

•2-channel output — Each channel outputs a video image that can be completely different from the video on the opposite channel, though both must be of the same resolution and frame rate. The video signal for each channel is available on two outputs; both the HD-SDI output and DVI-I output for that channel.

•2-channel locked output — Each channel outputs a video signal that is synchronized to the video on the opposite channel. The video signal for each channel is available on two outputs; both the HD-SDI output and DVI-I output for that channel.

•1-channel output — Outputs an analog or digital signal. The video signal for the channel is available on two outputs; both the HD-SDI output and DVI-I output.

NOTE: For two clips to load properly in 2-channel or 2-channel locked mode, both must be created at the same resolution and frame rate.

Operational flexibility — Operations such as input/output selection and setting of presets can be performed using a variety of local and remote control mechanisms:

•Front panel controller — Intuitive front panel user interface with an LCD display and a rotary encoder for easy local control of the player. The video portion of a playing presentation can be displayed in the LCD as a confidence monitor.

•HTML pages — Built-in pages for controlling the player from anywhere in the world.

•MSVPP commands — A set of basic commands that provide simple control through a control system or PC

JMP 9600 Media Player • Introduction 3