Procedure 2. Al Front Frame/Al8 CRT
A18Wl
F
SK126
Figure 3-5. Installing the CRT and Front-Frame Assemblies
Replacement
Note | Use care when handling the glass CRT EM1 shield. The glass may be cleaned |
| using thin-film cleaner (HP part number 8500-2163) and a lint-free cloth. |
| When installing the glass shield, face the side of the glass with the silver |
| coated edge towards the inside of the analyzer. |
| |
1.Place the analyzer on its right-side frame with the front end extending slightly over the front of the work bench.
2.Gently place the A18 CRT assembly into the Al Front-Frame assembly as llustrated in Figure 3-6.
3.Place the front-frame and CRT assemblies into the analyzer, using caution to avoid pinching any cables.
4.Dress the AlBWl trace-align wires between the CRT assembly mounts and the A6 Power Supply top shield.
