Procedure 9. Al4 and Al5 Assemblies

R e m o v a l

1.Remove the analyzer’s cover as described in Procedure 1, “Analyzer Cover.”

2.Place the analyzer on its right side frame.

3.Remove the eight screws and washers holding the Al4 and Al5 assemblies to the bottom of the analyzer. These screws are labeled 1 and 2 in Figure 3-19.

A /./P1 1

/

r

SK143

Figure 3-19. Al4 and Al5 Assembly Removal

Caution Washers are not captive. Loose washers in instrument may cause internal damage.

3-34 Assembly Replacement