166 Bluetooth

Unpairing from a Bluetooth device

You can make HTC Wildfire S forget its pairing connection with another Bluetooth device. Doing so may require you to enter or confirm a passcode again if you want to reconnect to the other device.

1.From the Home screen, press , and then tap Settings > Wireless & networks.

2.Tap Bluetooth settings.

3.In the Bluetooth devices section, press and hold the device to unpair.

4.Tap Disconnect & unpair, or tap Unpair if the Bluetooth device is currently not connected to HTC Wildfire S.

Sending information using Bluetooth

You can use Bluetooth to send information from HTC Wildfire S to another Bluetooth enabled device such as a phone or notebook computer. You can send the following types of information, depending on the device you are sending to:

§Images and videos

§Calendar events

§Contacts

§Audio files

Before you begin, set the receiving device to discoverable mode. You may also need to set it to “Receive Beams” or “Receive Files”. Refer to the device’s documentation for instructions on receiving information over Bluetooth.

1.On HTC Wildfire S, open the app that contains the information or file you want to send.

2.Follow the steps for the type of item you want to send:

Captured photo or

After capturing, on the Camera preview screen, tap ,

video

and then tap Bluetooth.

 

Photos or videos

1.

On the Albums tab

of the Gallery app, choose an

 

 

 

album.

 

 

2.

Tap , and then tap Bluetooth.

 

3.

Choose the photos and videos you want to share, and

 

 

then tap Next.

 

 

 

 

 

Page 166
Image 166
HTC manual Sending information using Bluetooth, Unpairing from a Bluetooth device