HTC manual Connecting HTC Wildfire S to a computer, Copying files to or from the storage card

27 Basics

Connecting HTC Wildfire S to a computer

Whenever you connect HTC Wildfire S to a computer using the USB cable, the Connect to PC screen opens and lets you choose the type of USB connection.

Select one of the following choices, and then tap Done:

Charge only	Select this option if you only want to charge the battery while
	connected to your computer.
HTC Sync	Select this option to synchronize contacts, calendar, and other
	information between your computer and HTC Wildfire S.
Disk drive	This mode is available only when there’s a storage card installed on
	HTC Wildfire S. Select this mode when you want to copy files
	between the storage card and your computer.
	When Disk drive mode is enabled while HTC Wildfire S is connected
	to the computer, you will not be able to use apps on HTC Wildfire S
	to access the storage card.
USB	When you do not have an Internet connection on your computer, you
tethering	can select this mode to share your HTC Wildfire S mobile data
	connection with your computer.

Internet If you don’t have a data plan or you don’t have access to a Wi-Fi pass-through network, you can select this mode to share your computer’s Internet

connection with HTC Wildfire S.

Copying files to or from the storage card

You can copy your music, photos, and other files to the storage card.

1.Connect HTC Wildfire S to your computer using the supplied USB cable.

2.On the Connect to PC screen, tap Disk drive, and then tap Done. On your computer, the storage card is recognized as a removable disk.

3.Navigate to the removable disk and open it.

4.Do one of the following:

§Copy the files from the computer to the storage card’s root folder.

§Copy the files from the storage card to a folder in your computer.

5.After copying the files, unmount the removable disk (that is, the connected HTC Wildfire S) as required by your computer’s operating system to safely remove HTC Wildfire S.

6.Do one of the following:

§Disconnect HTC Wildfire S from the computer.

§If you want to keep HTC Wildfire S connected to the computer but want it to be able to access the storage card, open the Notifications panel, tap Disk drive, select an option except Disk drive, and then tap Done.