Lexmark IBM 9077 manual Root@sp21n06/ netstat -rn

3. On node 6 in SP21, add the following route to the Switch network of SP2:

route add -net 192.168.13 -netmask 255.255.255.0 -mtu 65280 \

192.168.14.4

The -mtu parameter is again optional but should be set to ensure optimal packet size on this route.

4. Check for correct routing entry:

root@sp21n06:/ netstat -rn
Routing tables
Destination	Gateway	Flags	Refs	Use	If	PMTU	Exp Groups
Route Tree for Protocol Family 2 (Internet):
default	192.168.4.137	UG	0	14	en0	-	-
127/8	127.0.0.1	U	8	402	lo0	-	-
192.168.4/24	192.168.4.6	U	6	100681	en0	-	-
192.168.13/24	192.168.14.4	UG	0	0	css0 65280		-
192.168.14/24	192.168.14.6	U	2	9973	css0	-	-
Route Tree for Protocol Family 24 (Internet v6):
::1	::1	UH	0	0	lo0 16896		-

5. On node 8 in SP21, add the following route to the switch network of SP2:

route add -net 192.168.13 -netmask 255.255.255.0 -mtu 65280 \

192.168.14.129

6. Check for correct routing entry:

root@sp21n08:/ netstat -rn
Routing tables
Destination	Gateway	Flags	Refs	Use	If	PMTU	Exp Groups
Route Tree for Protocol Family 2 (Internet):
default	192.168.4.137	UG	0	16	en0	-	-
127/8	127.0.0.1	U	8	420	lo0	-	-
192.168.4/24	192.168.4.8	U	6	101781	en0	-	-
192.168.13/24	192.168.14.129	UG	0	0	css0 65280		-
192.168.14/24	192.168.14.8	U	3	10714	css0	-	-
Route Tree for Protocol Family 24 (Internet v6):
::1	::1	UH	0	0	lo0 16896		-

7. On node 10 in SP21, add the following route to the switch network of SP2:

route add -net 192.168.13 -netmask 255.255.255.0 -mtu 65280 \

192.168.14.129

192IBM 9077 SP Switch Router: Get Connected to the SP Switch