# | (except for RFC 1483 bridging) |
#’llc,bridging’ any
# | bridging [This is the PVC type for an interface using |
# | bridge_method=llc_encapsulated.] |
#’vcmux_bridge’ bridged packets [This is a PVC type for an interface
# |
| using bridge_method=vc_multiplexed.] An additional | |
# |
| parameter specifies the protocol carried on the VC: | |
# | ether_fcs | Ethernet frames, with Frame Check Sequence | |
# | ether_nofcs | Ethernet frames, without Frame Check Sequence | |
# | fddi_fcs |
| FDDI frames, with Frame Check Sequence |
# | fddi_nofcs | FDDI frames, without Frame Check Sequence | |
# | bpdu |
| 802.1D Bridging Protocol Data Units |
# | ’vc’ | IP datagrams [This is a PVC type for an interface using | |
# |
| bridge_method=vc_multiplexed.] | |
# | ’vc_atmp’ | atmp home network connections using VC Based | |
# |
| Multiplexing. | |
# |
|
|
|
#If the ’proto’ specified is ’raw’, the ’dest_if’ parameter specifies the
#GigaRouter interface of the destination for this raw adaptation layer
#connection (specified in the same GigaRouter interface format
#described above), and (optionally) the dest_vc parameter specifies
#the destination VPI/VCI.
#
# the ’input_aal’ parameter may be used to specify the adaptation layer,
# | input_aal=3 | specifies |
# | input_aal=5 | specifies |
# |
|
|
#The optional ’traffic_shape’ parameter allows a traffic shape
#to be defined for this logical interface (the ’shape_name’ must be
#a named defined as a Traffic_Shape above).
#
#If no traffic shape is specified, a default shape of 155Kbps, high
#quality of service is used.
#
#PVC ga090 0/32 proto=ip traffic_shape=high_speed_high_quality #PVC ga0980 0/32 proto=ip traffic_shape=high_speed_high_quality
#PVC ga0a0 1/33 proto=raw traffic_shape=high_speed_high_quality \
#dest_if=ga090 dest_vc=5/50 input_aal=5
#PVC ga0a80 1/33 proto=ip traffic_shape=high_speed_high_quality
#PVC ga0b0 0/40 proto=isis traffic_shape=high_speed_high_quality #PVC ga0c0 0/41 proto=isis_ip traffic_shape=high_speed_high_quality
#PVC ga030 0/32 proto=llc,bridging
#PVC ga031 0/32 proto=vcmux_bridge,ether_nofcs #PVC ga031 0/33 proto=vcmux_bridge,fddi_nofcs #PVC ga031 0/34 proto=vcmux_bridge,bpdu
#Here come the different settings we used during
#the residency.
Traffic_Shape name=high_speed_high_quality \ peak=155000 sustain=155000 burst=2048 qos=high
Traffic_Shape name=low_speed_high_quality \ peak=15500 qos=high
# ATM
Traffic_Shape name=bigg_speed_high_quality \
