Lexmark IBM 9077 manual Using grrt to Display the Route Table, Fwd

4.2.8 Using grrt to Display the Route Table

Use the grrt -S-p<slot>command to display the current contents of the ATM OC-3c card’s route table. The following is an actual screen shot:

# grrt -S -p1
default		1	192.168.4.137	inx 0	RMS
0.0.0.0	255.255.255.255	8	0.0.0.0	inx 0	DROP
10.1.1.0	255.255.255.0	16	0.0.0.0	ga010	FWD
10.1.1.1	255.255.255.255	15	0.0.0.0	ga010	LOCAL
10.1.1.255	255.255.255.255	14	0.0.0.0	ga010	BCAST
10.1.2.1	255.255.255.255	19	0.0.0.0	ga0180	LOCAL
10.10.1.0	255.255.255.0	7	0.0.0.0	bg0	BFWD
10.10.1.13	255.255.255.255	6	0.0.0.0	bg0	BLOCAL
10.10.1.255	255.255.255.255	5	0.0.0.0	bg0	BBCAST
127.0.0.0	255.0.0.0	4	0.0.0.0	inx 0	FWD
127.0.0.1	255.255.255.255	3	127.0.0.1	inx 0	RMS
192.168.4.0	255.255.255.0	10	0.0.0.0	inx 0	RMS
192.168.13.0	255.255.255.0	17	10.1.1.2	ga010	FWD
192.168.14.0	255.255.255.0	13	0.0.0.0	gt030	FWD
192.168.14.4	255.255.255.255	12	0.0.0.0	gt030	LOCAL
192.168.14.255	255.255.255.255	11	0.0.0.0	gt030	BCAST
224.0.0.0	240.0.0.0	2	0.0.0.0	inx 0	MCAST
224.0.0.0	255.0.0.0	2	0.0.0.0	inx 0	MCAST
224.0.0.0	255.255.255.255	2	0.0.0.0	inx 0	MCAST
255.255.255.255	255.255.255.255	9	0.0.0.0	inx 0	BCAST
#

118IBM 9077 SP Switch Router: Get Connected to the SP Switch