route add
192.168.14.4
2. Check for correct routing entry:
root@sp21n01:/ netstat |
|
|
|
|
|
| |
Routing tables |
|
|
|
|
|
|
|
Destination | Gateway | Flags | Refs | Use | If | PMTU | Exp Groups |
Route Tree for Protocol Family 2 (Internet): |
|
|
|
| |||
default | 192.168.4.137 | UG | 0 | 515 | en0 | - | - |
10.1.1/24 | 192.168.14.4 | UG | 0 | 65 | css0 | - | - |
10.10.1/24 | 192.168.14.4 | UG | 0 | 2 | css0 | 4352 | - |
10.50.1/24 | 192.168.14.4 | UG | 0 | 37 | css0 | - | - |
127/8 | 127.0.0.1 | U | 8 | 518 | lo0 | - | - |
192.168.4/24 | 192.168.4.1 | U | 10 | 345052 | en0 | - | - |
192.168.13/24 | 192.168.14.4 | UG | 0 | 1360145 | css0 65280 | - | |
192.168.14/24 | 192.168.14.1 | U | 6 | 283472 | css0 | - | - |
Route Tree for Protocol Family 24 (Internet v6): |
|
|
| ||||
::1 | ::1 | UH | 0 | 0 | lo0 16896 | - | |
3. On nodes in SP2, add the following route to the switch network of SP21:
route add
192.168.13.16
The
4. Check for correct routing entry:
root@sp2n01:/ netstat |
|
|
|
|
|
| |
Routing tables |
|
|
|
|
|
|
|
Destination | Gateway | Flags | Refs | Use | If | PMTU | Exp Groups |
Route Tree for Protocol Family 2 (Internet): |
|
|
|
| |||
default | 192.168.3.37 | UG | 1 | 398 | en0 | - | - |
10.1.1/24 | 192.168.13.4 | UG | 0 | 94 | css0 | - | - |
127/8 | 127.0.0.1 | U | 8 | 541 | lo0 | - | - |
192.168.3/24 | 192.168.3.1 | U | 11 | 1065877 | en0 | - | - |
192.168.13/24 | 192.168.13.1 | U | 2 | 76677 | css0 | - | - |
192.168.14/24 | 192.168.13.16 | UG | 0 | 431146 | css0 65520 | - | |
Route Tree for Protocol Family 24 (Internet v6): |
|
|
| ||||
::1 | ::1 | UH | 0 | 0 | lo0 16896 | - | |
5. On GRF 1600, check /etc/grifconfig.conf for the following entry:
gt030 | 192.168.14.4 | 255.255.255.0 | - | mtu | 65520 |
gt040 | 192.168.13.16 | 255.255.255.0 | - | mtu | 65520 |
6.On the CWS of SP2 and on the CWS of SP21, check if SP Switch Router Adapter cards are configured. Check if the SP Switch Router Adapter
Multiple RS/6000 SPs and One SP Switch Router 205
