The following message is returned along with the changed prompt:
Current port card is 3
GR 3> .
• To leave any maint prompt and return to the shell, enter quit.
Following are just a few maint commands we have found useful; of course, your experiences may vary.
To see the list of maint commands for the receive side, enter maint 1; to see the list of maint commands for the transmit side, enter maint 101.
The maint 3 command gives you useful options for looking at a variety of active interfaces. To look at media information per port, use maint 4 and the port number, 0 or 1. Use maint 4 0 to see the information for the card’s port 0.
To display switch statistics, use maint 5, which will give you information about the number of packets to and from the switch (in the GRF).
You can return information about VPI/VCIs on a per port, per side basis with maint 13 0 or maint 13 1, respectively. For information about traffic statistics use maint 14 0 or maint 14 1, respectively.
Configuration of | 117 |
