Lexmark IBM 9077 manual 7025-F50 Configuration, Network Options of 7025-F50 Part 1

A.3 7025-F50 Configuration

A 7025-F50 was used for some ATM and Ethernet network tests. This machine is equipped with two166 MHz-604e processors, three 4500 MB

16-bit SCSI Disk Drives, an IBM 155 Mbps ATM PCI Adapter and an IBM 100/10 Mbps Ethernet PCI Adapter. AIX 4.3.1.1 is installed. For detailed software-level information, refer to Table 32 on page 239, but note that no PSSP file sets are installed. Table 49 contains the network options applied for the sample configurations.

Table 49. Network Options of 7025-F50 Part 1 of 3

Parameter	Value
thewall	16384
sockthresh	85
sb_max	1310720
somaxconn	1024
clean_partial_conns	0
net_malloc_police	0
rto_low	1
rto_high	64
rto_limit	7
rto_length	13
inet_stack_size	16
arptab_bsiz	7
arptab_nb	25
tcp_ndebug	100
ifsize	8
arpqsize	1
ndpqsize	50
route_expire	0
strmsgsz	0
strctlsz	1024
nstrpush	8
strthresh	85
psetimers	20

256IBM 9077 SP Switch Router: Get Connected to the SP Switch