DEFAULTS hold=2 local=y size=10000 logfile=/var/log/grclean.log
B.9 /etc/grdev1.conf
This file normally gets updated automatically by the SNMP daemon running on the CWS.
############################################################################
#DEV1 Configuration
###########################################################################
#There are several variables that an SP Adapter card needs at start up.
#These are handled by a set of GRINCHES whose descriptors are indexed
#by card number and interface number as follows:
#
#2.21.{CARD+1}.1.{INTERFACE+1}
#This template specifies the
#in a
#that the card needs to be configured.
#
#The descriptors are grouped by card and interface so that a particular
#interface can be easily configured.
#
############################################################################
#
#CARD 0 Interface 0
2.21.1.1.1.1 | "00" | # | Node | Name |
2.21.1.1.1.2 | # | Node | Number |
2.21.1.1.1.3"00:00:00:00:00:00:00:00:00:00" # Switch Token
2.21.1.1.1.4 | 2 | # Switch ARP |
2.21.1.1.1.5 | 0 | # Switch Node Number |
2.21.1.1.1.6 | x0.0.0.0 | # IP Address |
2.21.1.1.1.7 | x0.0.0.0 | # Net Mask |
2.21.1.1.1.8 | 1024 | # Max Link Pckt Len.(bytes) |
2.21.1.1.1.9 | 0 | # IP Host Offset |
2.21.1.1.1.10 | 1 | # Configuration State |
2.21.1.1.1.11 | "no name" | # System Name |
2.21.1.1.1.12 | 2 | # Node State |
2.21.1.1.1.13 | 0 | # Switch Chip Link |
2.21.1.1.1.14 | 64 | # Node Delay (cycles) |
2.21.1.1.1.15 | 1 | # Admin Status |
# |
|
|
#CARD 1 Interface 0
2.21.2.1.1.1 | "01" | # | Node | Name |
2.21.2.1.1.2 | # | Node | Number |
2.21.2.1.1.3"00:00:00:00:00:00:00:00:00:00" # Switch Token
2.21.2.1.1.4 | 2 | # Switch ARP |
2.21.2.1.1.5 | 0 | # Switch Node Number |
2.21.2.1.1.6 | x0.0.0.0 | # IP Address |
2.21.2.1.1.7 | x0.0.0.0 | # Net Mask |
2.21.2.1.1.8 | 1024 | # Max Link Pckt Len.(bytes) |
2.21.2.1.1.9 | 0 | # IP Host Offset |
2.21.2.1.1.10 | 1 | # Configuration State |
2.21.2.1.1.11 | "no name" | # System Name |
