Lexmark IBM 9077 manual Below is an actual example, 100

Below is an actual example:

#grstat -w70 all gt030 gt030

ipstat

count description 11095886 total packets received

51 packets dropped

3678330 packets forwarded normally

4 packets forwarded locally to card

1214 packets handled by the card

ipdrop

	last	last
count	source addr	dest addr reason
3	192.168.14.6	192.168.13.15 TTL expired

48	192.168.14.15		192.168.13.15 needed to frag packet but DF set
icmperr
	last	last	last	last		last
count type		code	val	source addr	dest addr error
icmpin
			last		last	last
count	type		code	source addr		dst addr
4	ECHO			192.168.14.1		10.10.1.13
icmpout
			last		last	last
count	type		code	source addr		dst addr
4	ECHOREPLY			192.168.14.1		10.10.1.13
48	UNREACH		NEEDFRAG	192.168.14.4		192.168.14.15
3	TIMXCEED		INTRANS	192.168.14.4		192.168.14.6
#

3.15 Bringing the SP Switch Router Adapter Card Online with the SP

After the SP Switch Router Adapter media card completes initialization, its state machine enters the Configured state. The media card sends an up-trap request to mib2d. mib2d sends the SP Switch manager a pair of switchNodeUp and switchConfigState (ConfigState=FullyConfigured) trap messages.

The SP system administrator now decides which action is required to bring the SP Switch Router Adapter’s interface online.

If the SP Switch Router Adapter was previously fenced from the Switch network with the -autojoinoption, the SP SNMP manager will automatically unfence the adapter. Otherwise, the SP system administrator must perform

Installation and Configuration 100