#gt020 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
gt030 | 192.168.14.4 | 255.255.255.128 | - | mtu 65520 |
#gt040 | 192.168.14.129 | 255.255.255.128 | - | mtu 65520 |
gt050 | 192.168.14.129 | 255.255.255.128 | - | mtu 65520 |
#gt060 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt070 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt080 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt090 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt0a0 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt0b0 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt0c0 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt0d0 | 192.168.13.16 | 255.255.255.0 | - | mtu 65520 |
#gt0e0 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
#gt0f0 | 0.0.0.0 | 255.255.255.0 | - | mtu 65520 |
de0 | 192.168.4.4 | 255.255.255.0 |
|
|
#ga010 | 10.1.1.1 | 255.255.255.0 | - | mtu 9180 |
#ga0180 | 10.1.2.1 | 255.255.255.0 | 10.1.2.1 | |
bg1 | 10.1.1.1 | 255.255.255.0 | - | mtu 9180 |
# gf000 | 10.2.1.15 | 255.255.255.0 | - | mtu 4352 |
# gf001 | 10.3.1.16 | 255.255.255.0 | - | mtu 4352 |
# gf002 | 10.4.1.17 | 255.255.255.0 | - | mtu 4352 |
# gf003 | 10.5.1.18 | 255.255.255.0 | - | mtu 4352 |
bg0 | 10.10.1.13 | 255.255.255.0 | - | mtu 4352 |
ge070 | 10.20.30.1 | 255.255.255.0 | - | mtu 1500 |
#ge071 | 192.168.4.71 | 255.255.255.0 | - | mtu 1500 |
#ge072 | 192.168.4.72 | 255.255.255.0 | - | mtu 1500 |
#ge073 | 192.168.4.73 | 255.255.255.0 | - | mtu 1500 |
#ge074 | 192.168.4.74 | 255.255.255.0 | - | mtu 1500 |
#ge075 | 192.168.4.75 | 255.255.255.0 | - | mtu 1500 |
#ge076 | 192.168.4.76 | 255.255.255.0 | - | mtu 1500 |
#ge077 | 192.168.4.77 | 255.255.255.0 | - | mtu 1500 |
gh080 | 10.50.1.1 | 255.255.255.0 | - | mtu 65280 |
# ga020 | 10.20.30.1 | 255.255.255.0 | - | mtu 9180 |
B.11 /etc/grlamap.conf
This file contains the mapping of logical addresses to destination portcards for HIPPI interfaces. We used this file in Section 7.3, “HIPPI Backbone Connection” on page 227.
#NetStar $Id: grlamap.conf,v 1.1 1995/02/09 20:29:27 scotth Exp $
################################################################################
#There are 3 fields to determine how logical addresses get
#mapped to destination portcards for each hippi portcard.
#
#The first field is a comma separated list which determines the
#portcard on which the other 2 fields will apply.
#Ranges are allowed. i.e.,
#’*’ signifies that all portcards get this mapping.
#
#The second field is a comma separated list of logical addresses being mapped.
#Ranges are allowed.
#values: 0 - 4095 inclusive, ’*’ signifies the default (i.e., all LAs).
#
#The third field is a comma separated list of destination port cards.
#Only the first 4 values will be taken as valid, any extra values will
#be flagged invalid, a message will be printed to gr.console & grlamap will
