Interface | Port ID | Con | State | Cost | Cost | Bridge | Port |
gf000 | 128 1 | Yes | Forwarding | 10 | 0 | [me] | 128 1 |
gf001 | 128 2 | Yes | Forwarding | 10 | 0 | [me] | 128 2 |
gf002 | 128 3 | Yes | Forwarding | 10 | 0 | [me] | 128 3 |
gf003 | 128 4 | Yes Forwarding | 10 | 0 | [me] | 128 4 | |
Bridge Group | bg1 |
|
|
|
|
|
|
Spanning Tree: | Enabled |
|
|
|
| ||
Designated Root: 32768 00:c0:80:84:8c:eb |
|
| |||||
Bridge ID: | 32768 00:c0:80:96:38:68 |
|
| ||||
Root Port: ga010, Root Path Cost: 10 |
|
|
| ||||
Topology Change Detected: No |
|
|
|
| |||
Root Max Age: 20, Hello Time: | 2, Forward Delay: 15 |
| |||||
Bridge Max Age: 20, Hello Time: | 2, Forward Delay: 15, Hold Time: 1 |
| |||||
|
|
|
| Path | Desig Desig | Desig | |
Interface Port ID Con State | Cost | Cost | Bridge | Port | |||
*ga010 | 128 1 | Yes Forwarding | 10 | 0 | 32768 00:c0:80:84:8c:eb | 128 1 | |
ga0180 | 128 2 | Yes Blocking | 10 | 0 | 32768 00:c0:80:84:8c:eb | 128 2 | |
4.6.10.2 brinfo
The brinfo command is used to retrieve bridging interface information for administrative debugging and other situations where a simple checking of bridge port information is needed.
The brinfo command prints the list of bridge groups and bridge ports (underlying interfaces) that are members of the specified groups. If no groups are specified, all groups are reported on by default. Remember that brinfo gets its information directly from the BSD kernel, whereas brstat gets its information from bridged.
See the brinfo output for the same configuration as used for the brstat output before:
Bridged Daemon: Running
Bridge group name: bg0
Flags:(0x3043) up broadcast running
Ports: 4
Port gf000: State (0xf) Forwarding
Flags: 0xb043 up broadcast running link0 link1 multicast
Bridging media: fddi bpdu
MAC address: 0:c0:80:89:2d:f2
Port gf001: State (0xf) Forwarding
Flags: 0xb043 up broadcast running link0 link1 multicast
Bridging media: fddi bpdu
MAC address: 0:c0:80:89:2d:f3
Port gf002: State (0xf) Forwarding
Flags: 0xb043 up broadcast running link0 link1 multicast
Bridging media: fddi bpdu
MAC address: 0:c0:80:89:2d:f4
Port gf003: State (0xf) Forwarding
Configuration of | 147 |
