![](/images/new-backgrounds/1185470/185470435x1.webp)
The
4. Check for correct routing entry:
root@sp2n01:/ netstat |
|
|
|
|
|
| |
Routing tables |
|
|
|
|
|
|
|
Destination | Gateway | Flags | Refs | Use | If | PMTU | Exp Groups |
Route Tree for Protocol Family 2 (Internet): |
|
|
|
| |||
default | 192.168.3.37 | UG | 0 | 30 | en0 | - | - |
127/8 | 127.0.0.1 | U | 8 | 397 | lo0 | - | - |
192.168.3/24 | 192.168.3.1 | U | 8 | 86147 | en0 | - | - |
192.168.13/25 | 192.168.13.1 | U | 1 | 4 | css0 | - | - |
192.168.13.128/25 192.168.13.4 | UG | 0 | 3082 css0 65520 | - | |||
Route Tree for Protocol Family 24 (Internet v6): |
|
|
|
| |||
::1 | ::1 | UH | 0 | 0 | lo0 16896 | - |
5.On GRF 400, check /etc/grifconfig.conf for the following entry (or one similar):
gt020 192.168.13.129 255.255.255.128
gt030 192.168.13.4 255.255.255.128
6.On the CWS of SP2, check if SP Switch Router Adapter cards are configured. See if both SP Switch Router Adapter cards show up green in perspectives or enter SDRGetObjects switch_responds. Use Eunfence if needed.
7.Issue some ping commands to check the connection:
On node 11, node 12 and node 15 of SP2, ping the SP Switch interface of any node in partition 1 in SP2, for example:
root@sp2n11:/ ping 192.168.13.1
PING 192.168.13.1: (192.168.13.1): 56 data bytes
64 bytes from 192.168.13.1: icmp_seq=0 ttl=254 time=0 ms
64 bytes from 192.168.13.1: icmp_seq=1 ttl=254 time=0 ms ^C
2 packets transmitted, 2 packets received, 0% packet loss
On any node in partition 1 in SP2, ping the SP Switch interfaces of any node in partition 2 in SP2, for example: