(0)f50:/ 15$ ping 10.1.2.1
PING 10.1.2.1: (10.1.2.1): 56 data bytes
64 bytes from 10.1.2.1: icmp_seq=0 ttl=255 time=0 ms
64 bytes from 10.1.2.1: icmp_seq=1 ttl=255 time=0 ms
64 bytes from 10.1.2.1: icmp_seq=2 ttl=255 time=0 ms ^C
3 packets transmitted, 3 packets received, 0% packet loss
(0)f50:/ 16$
To add the needed routing information, follow these steps:
1.On the F50, add the following route to the nodes in SP21:
route add -net 192.168.14 -netmask 255.255.255.0 -mtu 9180 10.1.2.1
2.Check for correct routing entry:
(0)f50:/ 26$ netstat |
|
|
|
|
|
| |
Routing tables |
|
|
|
|
|
|
|
Destination | Gateway | Flags | Refs | Use | If | PMTU | Exp Groups |
Route Tree for Protocol Family 2 (Internet): |
|
|
|
| |||
default | 9.12.1.30 | UG | 3 | 3043 | tr0 | - | - |
9.12.1/24 | 9.12.1.50 | U | 41 | 34248 | tr0 | - | - |
10.1.2/24 | 10.1.2.3 | U | 2 | 41 | at0 | - | - |
127/8 | 127.0.0.1 | U | 5 | 315 | lo0 | - | - |
192.168.14/24 | 10.1.2.1 | UG | 0 | 4558293 | at0 | 9180 | - |
Route Tree for Protocol Family 24 (Internet v6): |
|
|
| ||||
::1 | ::1 | UH | 0 | 0 | lo0 16896 | - | |
(0)f50:/ 27$ |
|
|
|
|
|
|
|
3.On the nodes in SP21 that are supposed to communicate with the F50, add the following route:
route add
4.Check for correct routing entry:
Single RS/6000 SP and Single SP Switch Router 171
