Lexmark IBM 9077 manual Enadmin Command Options

2.4.2.5 The enadmin Command

The enadmin command is used to change the status of the SP Switch router adapter in the GRF and can also be executed using smit. The fast path for smit is manage_extnode. The command options are shown in Table 10.

Table 10. enadmin Command Options

Flags	SMIT Option		Description
-a	Actions to	be	Either reset or reconfigure. A reset is sent to the
	performed	on	extension node SNMP Agent to change the
	the extension		target node to a down state (not active on the SP
	node		Switch). A reconfigure is sent to the extension
			node SNMP Agent to trigger reconfiguration of
			the target node, which causes the SNMP Agent
			to request new configuration parameters from
			the SP extension node SNMP Manager, and to
			reconfigure the target node when the new
			parameters are received.
	Node number		This is the node number the extension node
			logically occupies in the RS/6000 SP.

48IBM 9077 SP Switch Router: Get Connected to the SP Switch